X "Start"
Press this button to start the selected pro
-
gram.
7 "End"
Press this button to stop a program. Immedi
-
ately press once again to terminate a pro
-
gram. A stopped program can be restarted
by pressing the Start button.
9 Optic interface
Data transfer to and from the machine’s con-
trols and a PC can take place using relevant
software. The optic interface on the ma-
chine’s control panel provides the connec
-
tion point.
Emergency Stop Switch
Only to be used in an emergency.
The switch can be reset by turning the
ribbed disc clockwise.
After resetting the following appears in the
display:
PROGRAMME 1 COTTONS
PROGRAMME STOP
THROUGH POWER CUT
Please press the Start button.
^ Press X "Start" to continue the program.
Conversion of °C to °F
°C °F °C °F
10 50 70 158
20 68 80 176
30 86 90 194
40 104 100 212
50 122 110 230
60 140 120 248
Guide to the washer-extractor
11
To Next Page
Loading...
Need help?
General