Start up
^
Open the on-site water valves, (and the
supply valves for steam, if relevant).
^
Turn on the electricity supply at the mains
(on site).
^
Turn the key to position B "Operation".
The functions described below are re
-
stricted only to the "Operation" condition.
^
Empty all pockets.
Foreign objects, (eg nails, coins, paper
clips etc) can cause damage to textiles
and components in the machine.
^
Load the laundry.
^
Close the drum door.
^ Press the Y "Power on" button.
Program selection
^
Select a program (e.g. Program 1 COT
-
TONS).
The display shows the following (example):
PROGRAMME 1 COTTONS
>95 °C< Main wash 1
Rinses 3 1000 RPM
^
Use the button T "Prewash" to select a
"Prewash" if required.
When T "Prewash" has been pressed the
following shows in the display:
PROGRAMME 1 COTTONS
>60 °C< Prewash 1
95 °C Main wash 1
Rinses 3 1000 RPM
Operation
13
-
To Next Page
Loading...
Need help?
General