Please take note of the Installation Dia
-
gram and instructions supplied. They are
important for the proper connection of
supplies.
Plumbing
The water hook up is by a water valve, which
conforms with local and national regulations.
This work must be carried out by an autho
-
rized Miele service technician.
To ensure the machine is correctly con
-
nected please follow the installation plan
and the installation instructions supplied with
the machine.
The inlet pressure hoses supplied with the
machine must be used for connection to the
water supply. To ensure the hot water inlet
hose (marked 194°F/90°C) lasts for many
years, do not hook the hose up to a hot
water connection supplying water hotter
than 158°F/70°C. This hose should only be
replaced with a genuine Miele spare part.
Before connecting the inlet hoses to the ma
-
chine ensure that the filters and seals sup
-
plied in the accessories pack have been
correctly fitted.
A water pressure flow rate of at least 30 psi
(2 bar), maximum 145 psi (10 bar) is re
-
quired.
Water taken into the machine must not ex
-
ceed a temperature of 70°C/158°F.
Connection to cold water only
See the Installation diagram supplied
Installation
34
To Next Page
Loading...
Need help?
General