Changing temperaure and spin
speed
The following parameters can be changed
before the start of a program:
–
the temperature in 1 °C steps from cold,
15 °C to maximum 95 °C .
–
the spin speed in 100 rpm steps.
WS 5240 300 - 1100 rpm
WS 5320 300 - 1000 rpm
PROGRAMME 1 COTTONS
>60°< Prewash 1
95 °C Main wash 1
Rinses 3 1000 rpm
^
Use the 2 "Cursor" to position the cursor
on the input field for the Prewash tempera
-
ture, and set the temperature required
(here 60 °C) with the 3 4 "Minus or Plus".
^ Position the cursor on the input field for the
Main wash temperature, and set the tem-
perature required with 3 4 """.
^ Position the cursor on the input field for the
Spin speed, and set the spin speed re-
quired with the 3 4 "Minus or Plus".
Adding detergent
^
For the standard programs add detergent
to compartment:
2 = for the main wash
1 = for the Prewash (if required)
3 = fabric softener
4 = liquid bleach
5 = liquid detergent
Detergent use
^ Only use low sudsing detergents.
^ Do not oversuds the unit with too much de-
tergent.
^ Take into account the water hardness, and
the detergent manufacturer’s instructions
when filling the dispenser.
^
Do not fill fabric softener or bleaching
agent higher than the level marker in the
relevant dispenser compartment. Other
-
wise they will be siphoned into the suds
container.
^
Press X "Start" to begin washing.
Operation
14
To Next Page
Loading...
