Peak load cut-out
When the peak load (overload) cut-out func
-
tion is activated the heating is switched off
and the program is stopped. The following
message appears in the Display:
PROGRAMME 1 COTTONS
PROGRAMME STOP
PEAK LOAD CUT OUT ACTIVE
If the set temperature has not been reached,
the program sequence is stopped.
When the peak load cut out function is fin-
ished the program automatically carries on
from where it was left off.
PC- Printer connection:
The machine can be connected to a PC or
printer using an SD kit.
PC-Operation:
Program changes can be made via a PC, or
a new program can be downloaded. This re-
quires a special Editor Program which is
available from the Miele Professional Depart-
ment.
Printer-Operation:
It is possible to print out whole programs or
parts of programs. See "Programming In
-
structions".
Peak load cut-out / PC- Printer connection
25
To Next Page
Loading...
Need help?
General