Miele WTF 130 WPM User Manual

Warning and Safety instructions
10
 The washer-dryer must be isolated from the electricity supply
when cleaning and maintaining the machine and in the event of a
fault.
 The Miele "Water protection system" protects from water damage
provided the following conditions are met:
– The machine is correctly plumbed in and connected to the electri-
city supply.
– If a fault or damage has been identified, the washer-dryer must be
examined by a competent person before further use, and repaired
if necessary.
 The water flow pressure must be at least 100kPa and should not
exceed 1000kPa.
 Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. Only when these parts are fitted can Miele guaran-
tee the safety standards of the machine.
 If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
 This washer-dryer must not be used in a non-stationary location
(e.g. on a ship).
 Do not make any alterations to the washer-dryer, unless author-
ised to do so by Miele.
 Reliable and safe operation of this washer-dryer can only be as-
sured if it has been connected to the mains electricity supply.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm