Miele WTF 130 WPM User Manual

Warning and Safety instructions
12
 Fabric conditioner and similar products must be used according
to the instructions on the manufacturer's packaging.
 If the correct amount of detergent is dispensed, the washer-dryer
should not need to be descaled. If, however, there is large build-up
of limescale and you need to descale it, you must use a special non-
corrosive descaling agent. A suitable descaling agent is available to
order from Miele (see "Optional accessories"). Instructions on the
packaging must be strictly observed.
 To prevent the risk of fire, the following textiles must not be dried:
– Items which have not been washed.
– Items, such as workwear, which have not been thoroughly
washed and which are still soiled with grease, oil or other depos-
its (such as cooking oil, cosmetics, lotions etc). If items have not
been thoroughly washed there is a danger that these might ignite
when heated, even after they have been removed from the
washer-dryer at the end of the programme.
– Items (e.g. mops and floor cloths) which have been treated with
inflammable cleaning agents or which contain residues of acet-
one, alcohol, benzene, petrol, stain remover, turpentine, wax and
wax remover or other chemicals.
– Items which have been splashed with hair lacquer, hair spray, nail
varnish remover or similar substances.
When washing heavily soiled items ensure that you use sufficient
detergent and select a high temperature. If in doubt, wash the
items several times.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm