To Next PageTo Next PageWhat to do if Migatronic RALLY MIG 161i shows error codes E20-08 E20-09 E21-05?
If your Migatronic Welding System displays error codes E20-08, E20-09, or E21-05, it indicates that the control unit is defective. Contact MIGATRONIC Service for assistance.
What does error E20-07 mean on my Migatronic RALLY MIG 161i and how can I fix it?
If your Migatronic Welding System is showing error code E20-07, it means the internal copy protection is preventing access to the micro-processor. Try reinserting the SD card into the machine. If the problem persists, contact MIGATRONIC Service.
How to resolve Migatronic RALLY MIG 161i Welding System error codes E20-03 E21-02?
If your Migatronic Welding System displays error code E20-03 or E21-02, it indicates that the SD card contains multiple files with the same name. To resolve this, delete the files from the SD card and then reload the software.
What does error code E20-04 mean on a Migatronic Welding System?
If your Migatronic Welding System displays error code E20-04, it means the control unit is trying to access more data than available in memory. First, try reinserting the SD card. If that doesn't work, replace the SD card with one that is 2 GB or smaller. If the problem still occurs after these steps, contact MIGATRONIC Service.
How to fix Migatronic Welding System error codes E20-10 E21-07?
If the Migatronic Welding System shows error codes E20-10 or E21-07, it means the loaded file has an error. You can try reinserting the SD card into the machine. If the issue persists, replace the SD card.
What to do if Migatronic RALLY MIG 161i Welding System shows error codes E20-01 E21-01?
If your Migatronic Welding System displays error codes E20-01 or E21-01, it indicates that the SD card is not formatted correctly. You need to format the SD card as FAT on a PC and then download the software onto it. If the problem continues, consider replacing the SD card.
Why does my Migatronic Welding System show error code E21-04?
If your Migatronic Welding System displays error code E21-04, it means that the welding program package on the SD card is not compatible with your control unit. The solution is to use an SD card containing software that is specifically designed for your control unit.
What to do if Migatronic RALLY MIG 161i shows error codes E20-05 E20-06 E21-03?
If your Migatronic Welding System shows error codes E20-05, E20-06, or E21-03, this indicates that the software on the SD card is intended for a different type of control unit. To fix this, ensure you are using an SD card that contains software specifically designed for your control unit.
How to fix Migatronic RALLY MIG 161i error codes E20-00, E20-02, E21-00, E21-06, E21-08?
If your Migatronic Welding System displays error codes E20-00, E20-02, E21-00, E21-06, or E21-08, it means there is no software present in the control unit. To resolve this, download the software to an SD card, insert it into the control unit, and then power on the machine. If the issue persists, try replacing the SD card.
What should I do if my Migatronic RALLY MIG 161i displays error E20-07?
If your Migatronic Welding System displays error E20-07, it means the internal copy protection is preventing access to the microprocessor. Try reinserting the SD card into the machine.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 20-160 A |
| Duty Cycle 60% at 160 A | Yes |
| Weight | 13 kg |
| Wire Diameter | 0.6-1.0 mm |
| Fuse | 16 A |
| Duty cycle 60% at 40°C | 160 A |
| Duty cycle max. at 40°C | 160 A |
| Enclosure Class | IP23 |
| Rated Input Current | 16 A |
| Wire Feed Speed | 2-15 m/min |
| Type | MIG/MAG welding machine |
| Standards | EN/IEC 60974-1, EN/IEC 60974-10 |
Guides on how to correctly install the welding machine.
Instructions for connecting the gas hose to the welding machine.
Details on connecting the electrode holder for MMA welding.
Steps for properly installing the TIG torch.
How to adjust the torch for welding with a Dialog torch.
How to adjust the wire brake and drive rolls for optimal wire feeding.
Guidance on changing the wire liner for specific welding types.
Information on the turnable V-groove wire drive rolls.
How to select and change the welding polarity for different materials.
Explanation of the wire inching function.
Steps to power on, select settings, and start welding.
Procedure for reading software using an SD card.
Step-by-step guide for calibrating the wire feed speed.
Lists common error codes and their solutions for the welding machine.
Explanation of warning symbols and their meanings.
Detailed information on specific error codes like E11-20 and E11-27.
Specifications related to the power source of the RALLY MIG 161i.
