To Next PageTo Next PageWhat does it mean if my Migatronic RALLY MIG 161i is showing error E20-04?
If your Migatronic Welding System displays error E20-04, it indicates that the control unit attempted to read more data than available in the memory. Try reinserting the SD card. If the issue continues, replace the SD card.
What does error E20-10 or E21-07 mean on my Migatronic RALLY MIG 161i Welding System, and how do I fix it?
If your Migatronic Welding System displays error E20-10 or E21-07, it means that the loaded file has an error. To solve this, try reinserting the SD card into the machine. If the problem persists, replace the SD card.
What to do if Migatronic RALLY MIG 161i shows error E20-03 or E21-02?
If your Migatronic Welding System is displaying error E20-03 or E21-02, it indicates that the SD card contains multiple files with the same name. To resolve this, delete the files from the SD card and then reload the software.
What should I do if my Migatronic RALLY MIG 161i Welding System displays error E21-04?
If your Migatronic Welding System shows error E21-04, it means the welding program package on the SD card is not compatible with your control unit. You should use an SD card that contains software that is the correct match for your control unit.
Why is my Migatronic Welding System showing error E20-01 or E21-01?
Error codes E20-01 or E21-01 on your Migatronic Welding System indicate that the SD card is not formatted correctly. You must format the SD card as FAT on a PC and then download the software to the SD card. If problems continue, consider replacing the SD card.
What does it mean if my Migatronic Welding System displays error E20-05, E20-06, or E21-03?
If your Migatronic Welding System shows error codes E20-05, E20-06, or E21-03, it means the software on the SD card is intended for a different type of control unit. To fix this, use an SD card containing software specifically designed for your control unit.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 20-160 A |
| Duty Cycle 60% at 160 A | Yes |
| Weight | 13 kg |
| Wire Diameter | 0.6-1.0 mm |
| Fuse | 16 A |
| Duty cycle 60% at 40°C | 160 A |
| Duty cycle max. at 40°C | 160 A |
| Enclosure Class | IP23 |
| Rated Input Current | 16 A |
| Wire Feed Speed | 2-15 m/min |
| Type | MIG/MAG welding machine |
| Standards | EN/IEC 60974-1, EN/IEC 60974-10 |
Guides on how to correctly install the welding machine.
Instructions for connecting the gas hose to the welding machine.
Details on connecting the electrode holder for MMA welding.
Steps for properly installing the TIG torch.
How to adjust the torch for welding with a Dialog torch.
How to adjust the wire brake and drive rolls for optimal wire feeding.
Guidance on changing the wire liner for specific welding types.
Information on the turnable V-groove wire drive rolls.
How to select and change the welding polarity for different materials.
Explanation of the wire inching function.
Steps to power on, select settings, and start welding.
Procedure for reading software using an SD card.
Step-by-step guide for calibrating the wire feed speed.
Lists common error codes and their solutions for the welding machine.
Explanation of warning symbols and their meanings.
Detailed information on specific error codes like E11-20 and E11-27.
Specifications related to the power source of the RALLY MIG 161i.
