To Next PageTo Next PageWhat does error code E20-04 mean on a Migatronic Welding System?
If your Migatronic Welding System displays error code E20-04, it means the control unit is trying to access more data than available in memory. First, try reinserting the SD card. If that doesn't work, replace the SD card with one that is 2 GB or smaller. If the problem still occurs after these steps, contact MIGATRONIC Service.
How to resolve Migatronic RALLY MIG 161i Welding System error codes E20-03 E21-02?
If your Migatronic Welding System displays error code E20-03 or E21-02, it indicates that the SD card contains multiple files with the same name. To resolve this, delete the files from the SD card and then reload the software.
What does error E20-07 mean on my Migatronic RALLY MIG 161i and how can I fix it?
If your Migatronic Welding System is showing error code E20-07, it means the internal copy protection is preventing access to the micro-processor. Try reinserting the SD card into the machine. If the problem persists, contact MIGATRONIC Service.
What to do if Migatronic RALLY MIG 161i shows error codes E20-08 E20-09 E21-05?
If your Migatronic Welding System displays error codes E20-08, E20-09, or E21-05, it indicates that the control unit is defective. Contact MIGATRONIC Service for assistance.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 20-160 A |
| Duty Cycle 60% at 160 A | Yes |
| Weight | 13 kg |
| Wire Diameter | 0.6-1.0 mm |
| Fuse | 16 A |
| Duty cycle 60% at 40°C | 160 A |
| Duty cycle max. at 40°C | 160 A |
| Enclosure Class | IP23 |
| Rated Input Current | 16 A |
| Wire Feed Speed | 2-15 m/min |
| Type | MIG/MAG welding machine |
| Standards | EN/IEC 60974-1, EN/IEC 60974-10 |
Guides on how to correctly install the welding machine.
Instructions for connecting the gas hose to the welding machine.
Details on connecting the electrode holder for MMA welding.
Steps for properly installing the TIG torch.
How to adjust the torch for welding with a Dialog torch.
How to adjust the wire brake and drive rolls for optimal wire feeding.
Guidance on changing the wire liner for specific welding types.
Information on the turnable V-groove wire drive rolls.
How to select and change the welding polarity for different materials.
Explanation of the wire inching function.
Steps to power on, select settings, and start welding.
Procedure for reading software using an SD card.
Step-by-step guide for calibrating the wire feed speed.
Lists common error codes and their solutions for the welding machine.
Explanation of warning symbols and their meanings.
Detailed information on specific error codes like E11-20 and E11-27.
Specifications related to the power source of the RALLY MIG 161i.
