4
Which helicopters are suitable for the VBar System?
Generally speaking, the VBar System can be used in any model
helicopter, with the one prerequisite that the use of the V-Bar must
not lead to any restrictions concerning the safe operation of the model.
Of course the VBar cannot be used in any helicopter carrying humans
or animals, or in helicopters which could in any manner endanger
persons, animals or things. You must refer to the safety
recommendations included in section 15 of this manual.
2. Installation
The VBar System includes the following components:
• Central Unit
• Gyro Sensor
• Bluetooth Module (optional)
• Control Panel (optional)
Each component must be installed in the helicopter properly. For
instance, the wires of the central unit must be placed correctly. The
gyro sensor needs to be calibrated along the longitudinal axis and
the pitch axis. On the pages to follow, we explain some important
details on the placement of the individual components of the VBar.
To Next Page
Loading...
Need help?
General
