Mikro MK2000 - Tests and Standards

High voltage dielectric withstand test IEC60255-5……..2.0KV rms, 1 min
High voltage impulse test. IEC60255-5……………………..5KV, 1.2/50ì s
Electrical fast transient. IEC61000-4-4,
Level 4, power supply inputs…………………………………….4KV, 5/50ns
Electrical fast transient. IEC61000-4-4,
Level 4, other inputs…………..…………………………………….2KV, 5/50ns
Electrostatic discharge. IEC61000-4-2
Class III, air discharge……………………………………………….8KV
Electrostatic discharge. IEC61000-4-2
Class III , contact discharge………………………………………..6KV
Enclosure protection when panel mounted…………………IP54
8. Test and Standards
MK2000
Page 37