1. Press the [click] button to turn the Click function on.
ð
The indicator LED flashes, the Click comes with click sound by default.
2. Press the [click] button again to change the click sound to ‘human voice’.
3. Press the [click] button a third time to turn the Click function off.
After switching on, you can change the click volume in a range of 0 to 16 using the [–] and [+]
buttons. To do so, keep the [click] button pressed. The display shows the set value in ‘Cxx’
format.
Use the [tempo –/+] button to change the click tempo in a range of 30 to 280 beats per minute.
Use the [–/+] button to set the time signature to 2/4, 3/4, 4/4, 5/4 or 6/8.
To reset the click tempo to the default value ‘110’ press the middle of the [tempo –/+]
button.
The click function can be turned on or off during playback.
Click function
Operation
MPS-400
23
To Next Page
Loading...
