Millenium MPS-400 - Touch Sensitivity of the Hi-Hat; MIDI Processing

1. Press the [utility] button until the display shows the current dynamic setting in ‘CUx’
format .
2. Press the button of the pad whose dynamic range you want to change. Alternatively,
you can directly activate the pad by playing it.
3. Adjust the dynamic using the [–]/[+] button.
4. Repeat steps 2 to 3 to adjust the dynamic of the other pads as desired.
5. Press [utility] to jump to the next parameter.
1. Press the [utility] button until the display shows the current touch sensitivity of the hi-hat
in ‘Fxx’ format.
2. Adjust the touch sensitivity using the [–]/[+] button.
3. Press [utility] to jump to the next parameter.
You can use the ‘Local’ setting to determine whether the drum module processes the MIDI sig‐
nals of the connected pads (default setting ‘Lon’) or the signals of an external MIDI sequencer
(‘Lof’).
Touch sensitivity of the hi-hat
MIDI processing
Operation
MPS-400
35