You may adjust each pad within the stereo panorama independently from the others. To do so,
proceed as follows:
1. Press the [voice — vol/pan/tun] button repeatedly, until the display shows the setting of
the current selection in ‘P x’ format.
2. Press the button of the pad whose panorama setting you want to change. Alternatively,
you can directly activate the pad by playing it.
ð
The indicator LED of the pad lights up.
3. Adjust the panorama setting using the [–]/[+] button (setting range: from P-8 = left via
0 = centre to P8 = right).
4. Repeat steps 2 to 3 to adjust the panorama setting of the other pads as desired.
Adjusting the R/L panorama of
the pads
Operation
MPS-400
29
To Next Page
Loading...
