You may adjust the pitch of each pad independently from the others. To do so, proceed as fol‐
lows:
1. Press the [voice — vol/pan/tun] button repeatedly, until the display shows the setting of
the current selection in ‘t x’ format.
2. Press the button of the pad whose pitch you want to change. Alternatively, you can
directly activate the pad by playing it.
ð
The indicator LED of the pad lights up.
3. Adjust the pitch using the [–]/[+] button (setting range: t -8 to t 8).
4. Repeat steps 2 to 3 to adjust the pitch setting of the other pads as desired.
After you have assigned all the pads with the desired voices and adjusted the settings for
volume, panorama and pitch you can save the settings as a user kit in the unit. To do so, pro‐
ceed as follows:
1. Press the [save] button.
ð
The display shows the first unused memory slot (‘021’).
2. Select the desired memory slot using the [–]/[+] (range: 021 to 050).
3. Press the [save] button again to save your user kit as the desired number.
Adjusting the pitch of the pads
Storing settings
Operation
e-drum module
30
To Next Page
Loading...
Need help?
General
