Miller big blue 700x duo pro User Manual

OM-252 624 Page 52
8-2. Routine Maintenance
! Stop engine before maintaining.
 See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
 = Check  = Change  = Clean  = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
FUEL
WATER
Section 5-7,
8-5
 Fuel/Water Separator  Fuel Level  Oil Level  Oil, Fuel Spills
Every
50
Hours
 Weld Terminals
Every
100
Hours
Section 8-4
 Battery Terminals  Air Cleaner Hoses  Air Cleaner Element
Every
250
Hours
1/2 in.
(13 mm)
Engine
Manual
 Unreadable Labels  Fan Belt Tension  Cooling System Spark Arrestor
Every
500
Hours
 Weld Cables
Every
1000
Hours
NOTICE − Change engine
oil and filter after initial 50
to 75 hours of use.
Section 8-5,
8-3 and
Engine
Manual
 Oil  Oil Filter  Fuel Filter
OR
SLUDGE
FUEL
 Slip Rings*
 Brushes*
 Inside Unit Valve Clearance*  Drain Sludge
Every
3000
Hours
 Injectors*
Every
6000
Hours
or 5
Years
 Engine Timing Belt
 = Clean unit exterior, including stainless steel, frequently to prevent rust and corrosion.

Miller big blue 700x duo pro Specifications

General

Model	Big Blue 700X Duo Pro
Max Output	700 A
Dimensions	48.4 x 28.3 x 37.4 inches
Engine	Kubota D902
Fuel Type	Diesel
Type	Diesel Engine-Driven Welding Generator
Welding Amperage Range	20 - 700 A
Output Current Range	20 - 700 Amps
Output Voltage Range	14 - 44 VDC
Duty Cycle	100%
Voltage	14-44 VDC
Weight	1, 050 lbs
Input Voltage	None (Engine Driven)
Input Current	None (Engine Driven)
Input Power	None (Engine Driven)
Net Weight	1, 050 lbs (476 kg)