Miller Fusion 185 User Manual

OM-284208 Page 26
F
Complete Parts List is available at www.MillerWelds.com
SECTION 6 – INSTALLATION FOR UTILITY POWER
6-1. Selecting A Location
Movement

A complete Parts List is available at www.MillerWelds.com
OM-279105 Page 8
SECTION 2 INSTALLATION FOR UTILITY POWER
2-1. Selecting A Location
4
1
2
3
2
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
2 in.
(51 mm)

A complete Parts List is available at www.MillerWelds.com
OM-
Writers: Remember to move unit dimension and weight and rating la-
bel location information to the appropriate sections.
1-3. Selecting A Location
3
18 in.
(460 mm)
18 in.
(460 mm)
1
2
loc_large 2018-08
Location And Airflow
 A complete Parts List is available at www.MillerWelds.com
OM-279105 Page 8
SECTION 2 INSTALLATION FOR UTILITY POWER
2-1. Selecting A Location
4
1
2
3
2
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
2 in.
(51 mm)
Do not move or operate unit where
it could tip.
Special installation may be re-
quired where gasoline or volatile
liquids are present - see NEC Ar-
ticle 511 or CEC Section 20.
1 Lifting Forks
Extend forks beyond opposite side of unit.
2 Lifting Handles
Use handles to lift unit.
3 Hand Cart
Use cart or similar device to move unit.
4 Line Disconnect Device
Locate unit near correct input power supply.

Miller Fusion 185 Specifications

General

Brand	Miller
Model	Fusion 185
Category	Portable Generator
Language	English