Miller Fusion 185 User Manual

OM-284208 Page 39
F
Complete Parts List is available at www.MillerWelds.com
9-7. Reorienting Recoil Starter
 A complete Parts List is available at www.MillerWelds.com
OM-279105 Page 14
4-3. Reorienting Recoil Starter
907720
1 2 3
OM-222 Page 1
allen_wrench
NGO’s
tools/
flathead philips head wrench
pliers
knife
heavy-duty workclamp light-duty workclamp wirecutter frontcutter
allen_set
needlenose
steelbrush nutdriver
chippinghammer
solderiron
stripcrimp
drill
torque wrench
socket wrench
hammer awl file
crimper
paintbrush
feelergauge flashlight ruler
toothbrush
greasegun
qtip (swab)
vicegrip
handream
punch
filterwrench
strapwrench
airgun
solvent pinextractor eprompuller pipewrench
torque screwdriver
crescent wrench
8 mm
Removing Recoil Starter
1 Recoil Starter
2 Screws
3 Blower Housing
Remove screws securing starter to blower
housing. Remove starter assembly.
Orient starter in desired position.
Installing Starter
Install retractable starter onto blower hous-
ing, leaving screws slightly loose.
Pull starter handle out until pawls engage in
drive cup. Hold handle in this position and
tighten screws securely.

Miller Fusion 185 Specifications

General

Brand	Miller
Model	Fusion 185
Category	Portable Generator
Language	English