Millipore Synergy UV-R User Manual

Synergy
®
R system
Synergy UV-R system
User manual

Millipore Synergy UV-R Specifications

General

Brand	Millipore
Model	Synergy UV-R
Category	Water Filtration Systems
Language	English

Summary

Introduction

Safety Information

Explains safety symbols and precautions for system operation.

Product Information

Pre Installation

Installation Requirements

Specifies feedwater, connection, and environmental requirements for installation.

Installation

Connection of the Power Cord – Turning on the System Power

Installation of the SynergyPak cartridge

Detailed steps for installing the SynergyPak cartridge.

Installation and Rinsing of the Final Filter

How to Calibrate the Flowrate

Procedure for calibrating the product water flowrate.

How to Set the Resistivity Setpoint

Instructions for setting the resistivity setpoint for alarms.

Using the Synergy R System

How to Get Water from the Synergy R System

Instructions on how to dispense product water.

How to Dispense an Exact Amount of Product Water

Guide for dispensing a specific volume of water.

How to Understand Synergy R System messages

Maintenance

Maintenance Schedule

How to Replace the SynergyPak cartridge

Detailed instructions for replacing the SynergyPak cartridge.

How to Replace the Final Filter

Instructions for replacing the final filter.

How to Replace the UV Lamp

Procedure for replacing the UV lamp.

How to View or Reset the UV Lamp Timer

Guide to checking and resetting the UV lamp timer.

Troubleshooting

Display Screen Issues

Low Water Flow or No Water Flow

Troubleshooting steps for water flow problems.

SynergyPak Cartridge Issues

Solutions for SynergyPak cartridge lifetime or installation problems.

UV Timer Exhausted or Lamp Issues

Troubleshooting for UV timer and lamp installation problems.