Tooling Specifications
Milltronics SL series lathes come equipped for various tooling sizes depending on
machine model and turret size selected. Please refer to your machine order or dealer to
find out what tooling is required for your particular machine.
Tool shank size SL6-10
The standard 8-position turret uses 1” (25mm) tooling while the optional 12 position turret
uses ¾” (20mm) tooling.
Tool shank size SL12
1-1/4” x 6” (32mm x 150mm), 8 position
Boring bar size SL6-10
The standard 8-position turret uses 1.5” (38mm) boring bar holders while the optional 12
position turret uses 1.25” (32mm) boring bar holders.
Boring bar size SL12
2” (50mm) boring bar holders.
12
To Next Page
Loading...
