48
Spindle Jog Function
The spindle jog button (when the door is open) will jog the main spindle (if in G24). If
og button (when the door is open) will jog the live
D
It
S300 M3
C90
25
1 F.2 (drilling in Z axis)
S300 M3
1 R3.1 F.2 (drilling in X axis)
Conv
o ational screen for drilling has a toggle field for drilling in Z or drilling
The Conversational screen for tool-changes has a field to specify which spindle
in G25 (live tooling spindle) the j
tooling spindle.
illing/Tapping Notes r
is possible to drill (or tap) 3 different ways.
Main spindle drilling on the face of the part
G24
G0 X0 Z1 (must be on the center line of the spindle)
G81 Z-1 R.1 F.2 (drilling in Z axis)
Live tooling spindle drilling on the face of the part
G
S300 M3
G0 X1 Z1
G81 Z-1 R.
Live tooling spindle on the diameter of the part
C90
G25
G0 X4 Z-1
G81 X
ersational Programming Support
The Convers
in the X axis.
o The Conversational screen for Positioning has a C axis field.
o
to activate.
To Next Page
Loading...
Need help?
General
