12
Control Instructions, Schematics
• Detailed instructions for programming the machine and operating it from the front
panel are given in the CNC operation manual provided separately.
• Electrical schematics, pneumatic diagrams (if applicable) and hydraulic diagrams
(if applicable) are located in the electrical and mechanical manual.
Tooling Specifications
Milltronics SL series lathes come equipped for various tooling sizes depending on
machine model and turret size selected. Please refer to your machine order or dealer to
find out what tooling is required for your particular machine.
Tool shank size
The standard 8-position turret uses 1” (25mm) tooling while the optional 12 position turret
uses ¾” (20mm) tooling.
Boring bar size
The standard 8-position turret uses 1.5” (38mm) boring bar holders while the optional 12-
position turret uses 1.25” (32mm) boring bar holders.
To Next Page
Loading...
Need help?
General
