22
This machine should only be
moved, loaded/unloaded, or
skidded/unskidded by a
trained and certified machine
mover.
Lifting
The preferred method of lifting Milltronics SL series lathes is by forklift.
By Crane or Hoist
If a crane or hoist must be used, the machine must be lifted using a special lifting pallet
and spreader bar, along with straps rated to handle the weight of the machine (See
Chapter 2).
Notes:
1. Use extreme caution whenever moving/lifting equipment
2. Be sure the straps and other rigging equipment are all appropriately rated to
handle the weight being lifted.
3. Always keep the machine well balanced, and as close to the ground as possible
when moving/lifting.
4. Use the slowest speed of the hoist/crane when moving/lifting.
To Next Page
Loading...
Need help?
General
