EasyManua.ls Logo

Milnor 36021 - Hazards Resulting from Damaged Mechanical Devices

Milnor 36021
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pellerin Milnor Corporation 9
WARNING:
Multiple Hazards Operating the machine with an inoperative safety
device can kill or injure personnel, damage or destroy the machine, dam-
age property, and/or void the warranty.
Do not tamper with or disable any safety device or operate the machine with a mal-
functioning safety device. Request authorized service.
WARNING: Electrocution and Electrical Burn Hazards Electric box doors—Op-
erating the machine with any electric box door unlocked can expose high
voltage conductors inside the box.
Do not unlock or open electric box doors.
WARNING: Entangle and Crush Hazards Guards, covers, and panels—Operating
the machine with any guard, cover, or panel removed exposes moving
components.
Do not remove guards, covers, or panels.
Hazards Resulting from Damaged Mechanical Devices
BNWRUS04.C04 0000234652 C.4 B.3 B.2 1/2/20, 2:19 PM Released
WARNING: Multiple Hazards Operating a damaged machine can kill or injure per-
sonnel, further damage or destroy the machine, damage property, and/or
void the warranty.
Do not operate a damaged or malfunctioning machine. Request authorized service.
WARNING: Explosion Hazards Cylinder—A damaged cylinder can rip apart dur-
ing extraction, puncturing the shell and discharging metal fragments at
high speed.
Do not operate the machine with any evidence of damage or
malfunction.
WARNING: Explosion Hazards Clutch and speed switch (multiple motor ma-
chines)—A damaged clutch or speed switch can permit the low speed mo-
tor to engage during extract. This will over-speed the motor and pulleys
and can cause them to rip apart, discharging metal fragments at high speed.
Stop the machine immediately if any of these conditions occur: ab-
normal whining sound during extract skidding sound as extract ends
clutches remain engaged or re-engage during extract
General Information

Table of Contents

Other manuals for Milnor 36021

Related product manuals