EasyManua.ls Logo

Milnor 36021 - Careless Use Hazards; Careless Operation Hazards-Vital Information for Operator Personnel (See also Operator Hazards Throughout Manual); Careless Servicing Hazards-Vital Information for Service Personnel; (See also Service Hazards Throughout Manuals)

Milnor 36021
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Pellerin Milnor Corporation
Careless Use Hazards
BNWRUS04.C05 0000234651 C.4 B.3 A.2 1/2/20, 2:19 PM Released
Careless Operation Hazards—Vital Information for Operator Personnel (see also
operator hazards throughout manual)
BNWRUS04.C06 0000234650 C.4 B.3 A.3 1/2/20, 2:19 PM Released
WARNING: Multiple Hazards Careless operator actions can kill or injure person-
nel, damage or destroy the machine, damage property, and/or void the
warranty.
Do not tamper with or disable any safety device or operate the machine with a mal-
functioning safety device. Request authorized service.
Do not operate a damaged or malfunctioning machine. Request authorized service.
Do not attempt unauthorized servicing, repairs, or modification.
Do not use the machine in any manner contrary to the factory instructions.
Use the machine only for its customary and intended purpose.
Understand the consequences of operating manually.
Careless Servicing Hazards—Vital Information for Service Personnel (see also
service hazards throughout manuals)
BNWRUS04.C07 0000234649 C.4 B.3 A.3 1/2/20, 2:19 PM Released
WARNING: Electrocution and Electrical Burn Hazards Contact with electric
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Entangle and Crush Hazards Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Confined Space Hazards Confinement in the cylinder can kill or injure
you. Hazards include but are not limited to panic, burns, poisoning, suffo-
cation, heat prostration, biological contamination, electrocution, and
crushing.
Do not enter the cylinder until it has been thoroughly purged, flushed,
drained, cooled, and immobilized.
General Information

Table of Contents

Other manuals for Milnor 36021

Related product manuals