MIMAKI CJV300-130 - Page 13

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.2 P.6
4.2 Assembling the Stands and the Device
R.1.0
1
2
3
4
5
6
7
12. Remove screws of the Stay 1 of both sides of the Main unit.
The Main unit is fixed to the pallet.
Release the Main unit by removing the screw.
13. Using the 8 screws (CS6x55 Black), attach the Stay 2 to the
Stay 1.
14. Hold the handles of the plotter by four people.
Stay 1
 Use the provided hexagonal wrench (size 6).
Stay 2
INSTALLATION GUIDE > Printer Assembly > Assembling the Stands and the Device
Model
CJV300
Issue
2014.09.01
Revised F/W ver. 1.30 Remark
1.0
Rev.