MIMAKI CJV300-130 - Connecting Interface and Power Cables

© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1 P.2R.1.0
1
2
3
4
5
6
7
INSTALLATION GUIDE > Ink Set > Changing the Joints
Model
CJV300
Issue
2014.09.01
Revised F/W ver. 1.30 Remark
1.0
Rev.
5.1 Changing the Joints
 Use protective glasses and gloves during work.
Depending on the working condition, ink may reach your eyes or your skin may be roughed due to
ink.
 For the tube route, refer to the following. (The figure viewing from the rear of machine)
6+W+Si ink set
4-color ink set
8-color ink set
4-color ink set
(Sb53)
4+Dk ink set
(Sb53)
6-color ink set
(Sb53)
6+Dk ink set
(Sb53)
6+W ink set
6+W+Si ink set