MIMAKI CJV330 Series - Page 87

Chapter 2 Printing
87
4
Edit the image.
• Specify the following settings by clicking the function icons shown on the right-hand side of the
screen:
(General Print): Specifies settings like enlargement/reduction and rotation.
(Quality): Selects a color profile for the media and ink set loaded in this machine.
• For more information, refer to the RasterLink reference guide. https://mimaki.com/
download/software.html
5
Print image data.
• "Starting Printing"(P. 89)
(1) Click (Execution) from the function icons on the right-hand side of the screen.
(2) Select "Immediate Print" or "RIP and Print", then click [Start].
• Media width must be reacquired after replacing media.
(1) Select the tab for 330 series in the main window.
(2) Click (Update the printer status) in the Printer tab.
2