MIMAKI JFX550-2513 - Usage Restrictions

3. Performing Maintenance
13
3
Slide the maintenance cover on the left side of the Y-bar.
• Lift the lever and slide it to the left.
Maintenance cover
Lever
4
Clean the UV-LED lamp.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
• Do not use excessive force when rubbing the UV-LED lamp with a cleaning stick. The UV-
LED lamp may be damaged.
5
Clean around the print head.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
Never touch the nozzle surface!
Clean the bottom of the carriage.
Clean the sides of the head.