MIMAKI JFX550-2513 - Waste Ink Tank Replacement

4. Consumable Item Replacement
21
2
Clean the wipe filter case.
3
Install new wipe filters.
Waste Ink Tank Replacement
Ink used during head cleaning and other processes is collected in the waste ink tank at the lower right of the
product.
The machine counts the amount of ink discharged. Once a specified value is reached, “0604 CHECK
WASTE BOTTLE” will appear in SYSTEM ALARM on the touch panel. Use this as a guide for replacing the
waste ink tank.
• For a 2.6-liter tank, the preset level is 80 % (2.1 liters).
• Continuing to use the product without disposing of the waste ink may result in waste ink
overflowing from the waste ink tank. Visually check ink levels in the waste ink tank about once a
week.
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with this machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
Replacing the Waste Ink Tank
1
From MENU on the touch panel, tap [MAINTENANCE].
• The Maintenance menu is displayed.
2
Tap [Other maintenance] > [Replace waste ink tank].
3
Open the waste ink tank guard.
• Remove the screw to open the waste ink tank guard.