3. Performing Maintenance
14
• Never touch the print head nozzle surface.
6
Once cleaning is complete, slide the maintenance cover on the left side of the Y-bar to close
it.
• Make sure the maintenance cover is returned to the correct position.
7
Tap [Complete] > [Finish].
Ink Discharge Channel Cleaning
Clean the ink discharge channel regularly to prevent clogging of the ink discharge channel below the cap.
1
From MENU on the touch panel, tap [MAINTENANCE].
• The Maintenance menu is displayed.
2
Tap [Weekly maintenance] > [Clean ink discharge path].
• The carriage moves over the table.
• The suction pump will start operating.
3
Apply maintenance liquid to the caps.
• Use a syringe to draw up and apply maintenance liquid to the caps.
4
Tap [Complete].
• Maintenance liquid is discharged from the pump tube (ink discharge channel below the cap). The
carriage returns to the station.
To Next Page
Loading...
