MIMAKI JFX550-2513 - Exterior Cleaning (E.g., Cover, Y-Bar, )

3. Performing Maintenance
15
Table Cleaning
Continuing to use the dirty table will cause dried ink and attached dust to rub against the head nozzle
surface, resulting in print defects (e.g., nozzle clogging, deflection). Ink left adhering to the table for extended
periods will be hard to remove, even with ethanol or solvents.
• Turn off the main power before performing maintenance tasks.
Remove dust or any solid materials frequently, using soft brush, dry cloth, or paper towel.
Dust and debris will accumulate on parts such as the table grooves and screw holes. Use a soft bristle brush
to remove dust and debris.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.
Exterior Cleaning (e.g., cover, Y-bar, )
• Turn off the main power before performing maintenance tasks.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.