7
4. Periodically care (once in a month)
(1) Replacing the H fan filter
Replace it once in a week or two weeks.
1
Move the carriage and open the rightside
maintenance cover.
• Refer to the Step 1 to 4 of Chapter 4 “replace the H fan
filter” of the user’s manual to perform the operation.
2
Remove the H fan filter cover at the right side of
the carriage.
• Remove the screw on the H fan filter cover before
removing the cover.
3
Remove the used H fan filter.
4
Mount a new H fan filter (SPC-0766).
• Align the hole in the H fan filter with the screw hole.
5
Return the H fan filter cover to the original
status.
6
Close the right side maintenance cover, and
press the key.
• Ink at printing adheres to the H fan filter ASSY. When replacing the filter, it is recommended to
perform the work with a sheet of paper placed.
Right side
maintenance cover
Screw
To Next Page
Loading...
