Need help?Do you have a question about the MIMAKI SIJ-320UV and is the answer not in the manual?
Covers proper placement and environmental conditions for the machine.
Identifies key parts of the machine on the front, rear, and right sides.
Details connecting cables, power, and filling ink.
Information on usable media, sizes, and handling precautions.
Step-by-step guide for powering the printer ON and OFF.
Procedures for setting roll, narrow roll, twin roll, and leaf media.
Covers changing origin, test printing, head cleaning, and media correction.
Steps for starting, stopping, and clearing print data.
Explains setup menu options for print conditions and machine settings.
Covers media correction, heater, UV mode, and ink drop position settings.
Details print speed, auto cleaning, interval wiping, and machine setup options.
Covers nozzle checks, recovery, and viewing machine information.
Precautions, cleaning solutions, exterior, platen, and sensor cleaning procedures.
Maintaining capping station, discharge passage, and ink head.
Procedures for replacing wipers, ink tanks, and cap absorbers.
Covers discarding waste ink and refilling antifreeze mixed water.
Addresses power issues, printing start failures, and media problems.
Remedies for poor image quality and nozzle clogging.
Deals with ink tank warnings, sub tank errors, and ink mixture issues.
Lists and explains various error codes and their solutions.
Details machine and ink specifications.
Lists supply items and provides a sheet for inquiries.
To Next Page
General