Chapter 1 Before Use
1-2
About installing this
machine
Where to Install This Machine
Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Working Environmental Temperature
Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
The heater temperature may not reach the set value,
depending on the ambient temperature.
When this machine is used in a hot environment, the UV
lamp may reach a high temperature. Then the machines
may display a warning or error message and stop
operation including printing.
About fixing machine
The leg of this machine has the level foot to fix the
machine.
Before turning the power ON, make sure that the printer
body is fixed with the leveling feet. The printer body may
start moving during operation if it is not fixed with the
leveling feet.
Moving This Machine
Model Width Depth Height
Gross
weight
SIJ-320UV 5410mm 995mm 1440mm 850 kg
• If the place to install the machine is exposed to
strong sunlight around the window, draw a curtain
to prevent the machine from being exposed to
strong sunlight.
6500 mm or more
500 mm
or more
1000 mm or more
3000 mm or more
500 mm
or more
1000 mm or more
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur.
Be sure to request your distributor or our service
office to move this machine.
To Next Page
Loading...
