MIMAKI SIJ-320UV - Setting a Key Buzzer; Setting the CONFIRM. FEED

3-15
3
2
2
Setting a Key Buzzer
You can turn off the buzzer sound when pressing the key.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”,
and press the key.
3
Press the
(>>)
.
4
Press to select “Key Buzzer” ,
and press the key.
5
Press to select a set value, and
press the key.
• Set value : ON/ OFF
6
Press the key several times to
end the setting.
Setting the Display of Media Detec-
tion
Set the following two items in media detection settings.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”,
and press the key.
3
Press the
(>>)
.
4
Press to select “Media Detect”,
and press the key.
5
Press to select AUTO/MANUAL,
and press the key.
6
Press the key several times to
end the setting.
Setting the CONFIRM. FEED
Set whether media feeding is performed for checking the
result of the test printing etc. or not.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”,
and press the key.
3
Press the
(>>)
.
4
Press to select “CONFIRM.
FEED” , and press the key.
5
Press to select a set value, and
press the key.
• Set value : ON/ OFF
6
Press the key several times to
end the setting.
• The buzzer sound is not disabled for errors,
warnings and/or operation completion even if this
setting is set to “OFF”.
Setting of Media
Detection
When loading the media, set whether
to detect the media width automatically
(AUTO) or decide the print range
manually (MANUAL).
• When using the media that cannot be detected by
the sensor, set the media detection setting to
"MANUAL".
• When “MANUAL” is selected, the values of
“MARGIN (RIGHT/LEFT)” on the SETUP MENU
have no effect. ( P.3-7)