MIMAKI SIJ-320UV - Machine Operation Settings

3-9
Chapter 3 Setup
3
2
2
Setting of Refresh
Sets the interval of refresh performed during printing.
1
Press the
(MENU)
key in
Local.
• SETUP MENU appears.
2
Press the
(<<)
.
3
Press to select “Refresh” , and
press the key.
4
Press to select a set value, and
press the key.
• Set value : Host/Lv.0 to Lv.3.
5
Press the key several times to
end the setting.
Setting of Vacuum Fan
Sets the absorbability of the media.
By setting the absorption power to match the media, you
can prevent print errors due to media rise-up.
1
Press the
(MENU)
key in
Local.
• SETUP MENU appears.
2
Press the
(<<)
.
3
Press to select “Vacuum Fan” ,
and press the key.
4
Press to select a set value, and
press the key.
• Set value : Host/Weak /Standard/ Strong/ OFF
5
If you choose any other option than "OFF"
in step 4, press , choose whether
to constantly operate the vacuum fan, and
press the key
• ON : Vacuum fan is constantly on.
• OFF : Vacuum fan is only on when printing or
performing jog operation.
6
Press the key several times to
end the setting.
Setting of Print Speed
Changes the media feeding speed and scanning spped in
printing.
1
Press the
(MENU)
key in
Local.
• SETUP MENU appears.
2
Press the
(<<)
.
3
Press to select “Print Speed” ,
and press the key.
4
Press to select a setting item,
and press the key.
• Set value : Feed Speed / Scan Speed
5
Press to select a set value, and
press the key.
• Set value of “Feed Speed”:10 to 100%
• Set value of “Scan Speed”:70 to 100%
6
Press the key several times to
end the setting.