MIMAKI SIJ-320UV - Setting Interval Wiping

3-11
Chapter 3 Setup
3
2
2
Setting Interval wiping
When a set time has elapsed, the machine automatically
wipes the nozzle surfaces of the head to remove any ink
droplets attached to the surfaces.
In case that deflection, nozzle missing, or symptom which
ink droplets fall down occurred, set the interval between
each operation shorter.
1
Press the
(MENU)
key in
Local.
• SETUP MENU appears.
2
Press the
(<<)
.
3
Press to select “Interval Wiping”
, and press the key.
4
Press to set intervals.
• Set Value : 3 to 255 Minutes, OFF
• When [OFF] is set, periodical wiping is not
executed.
5
Press the key.
6
Press the key several times to
end the setting.
• The color tone may change, depending on the
timing when periodic wiping is performed. Check
in advance that the color tone is not affected.