MIMAKI SIJ-320UV - Adjust the Waste Ink

4-19
4
2
Adjust the waste ink
Amount of waste ink that is displayed on the display is
only a "guideline".
The amount may be different from the amount acutally
accumulated.
1
Press key twice to display the
(WASTE INK) to [FUNC2]
2
Press (WASTE INK)
3
Press to adjust the amount of
waste ink
• Adjust to match the actual amount of waste ink.
4
Press key
Set to 0%
Set to 10%
Set to 30%
Set to 50%
Set to 70%