MIMAKI SIJ-320UV - Machine Setup MENU Table; Setting a AUTO Power-Off; Setting Feeding Unit; Setting Take-Up Unit

3-13
1
2
3
4
5
6
Chapter 3 Mchine setting
Machine Setup MENU table
Setting a AUTO Power-off
When no operation has been performed for the set time,
the power supply is automatically turned “OFF”.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”,
and press the key.
3
Press to select “AUTO POWER
OFF”, and press the key.
4
Press to select a set value, and
press the key.
• Set Value : none, 10 to 600min
5
Press the key several times to
end the setting.
Setting Feeding unit
For setting whether the Feedibg unit is used or not used.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”,
and press the key.
3
Press to select “Feeding Unit” ,
and press the key.
4
Press to select a set value, and
press the key.
• Set Value : ON/ OFF
5
Press the key several times to
end the setting.
Setting Take-up unit
For setting whether the take-up unit is used or not used.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”,
and press the key.
3
Press to select “Take-up Unit” ,
and press the key.
4
Press to select a set value, and
press the key.
• Set Value : ON/ OFF
5
Press the key several times to
end the setting.
Function name Set value Default Meaning
AUTO Power-off ( P.3-13)
NONE/
10 ~ 600min
30min
When no operation has been performed for the
set time, the power supply is automatically
turned “OFF”.
Feeding Unit ( P.3-13) ON/ OFF ON
You can set the operation method when the ON/
OFF button on the take-up unit is pressed.
Take-up Unit ( P.3-13) ON/ OFF ON
You can set the operation method when the ON/
OFF button for the take-up device is pressed.
Media Remain ( P.3-14) ON/ OFF OFF You can control the remaining amount of media.
TIME ( P.3-14) +4h ~ -20h Time difference is corrected.
UNIT/ TEMP. ( P.3-14) °C (Centigrade)/°F (Fahrenheit) °C A unit for displaying temperature is set.
UNIT/ Length ( P.3-14) mm / inch mm A unit for displaying length and area is set.
Key Buzzer ( P.3-15) OFF / ON ON A buzzer sound when keys are pressed is set.
Media Detect ( P.3-15) AUTO/MANUAL AUTO Set the media detection method.
CONFIRM. FEED ( P.3-15) ON / OFF ON
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
Reset
( P.3-16)
All setting values are returned to the status
default.
• If the machine received data from the PC in the
auto-power-off status, the power supply is turned
ON, however, printing operation is not started
automatically.