Need help?Do you have a question about the MIMAKI UJV100 and is the answer not in the manual?
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Ink Type | UV-curable ink |
| Ink Colors | CMYK, White, Clear |
| Interface | USB, Ethernet |
| Power Supply | AC 100-240V, 50/60Hz |
Highlights critical safety risks like electric shock, fire, and damage from liquids or blown debris.
Advises on protective gear and safe use of cleaning agents and solutions.
Provides essential notes on handling print heads, avoiding specific materials, and moving the carriage.
Outlines daily and weekly maintenance tasks, their timing, and lists the necessary cleaning items.
Detailed steps for cleaning the printer wiper and its bracket.
Procedure for cleaning the cap rubber to maintain print head health.
Instructions for cleaning the NCU sensor to ensure proper nozzle recovery.
Guide to cleaning the carriage underside and the UV-LED lamp to prevent contaminated prints.
Steps for washing print head nozzles to resolve print defects like clogging.
Regular cleaning of the ink discharge channel to prevent blockages.
How to clean media sensors for accurate media detection.
Cleaning the DAS sensor for correct drop position adjustment.
Instructions for cleaning the media holder and the printer platen.
Cleaning exterior covers and preparing the printer for extended periods of non-use.
Steps to replace the printer wiper when prompted or if worn.
Instructions for replacing the print head cap if it is damaged or worn.
How to replace the cap absorber to manage ink absorption.
Guide for replacing the LED glass if it becomes obscured by ink.
Procedure for replacing worn or dirty pinch rollers.
Steps for replacing a deformed media holder.
Instructions for replacing the media cutter when blades are dull or chipped.
Guide for replacing the waste ink tank when the level is reached.
To Next Page