6
3. Periodically care (Once a week)
Users are advised to perform the maintenance works described below once a week so that the printer will
keep its high performance and accuracy over an extended period of its life.
(1) Platen (“Cleaning the Platen” Chapter 4 of the Operation Manual)
The platen easily gets dirty with lint, paper dust, etc..
Wipe off conspicuous stains with a soft-hair brush, a dry
cloth, a paper towel, etc..
(2) Exterior (“Cleaning the Exterior Surfaces” Chapter 4, Operation Manual)
When the exterior surfaces of the machine are stained,
dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces
with the cloth.
• Turn off the main power and unplug the power cable before maintenance.
• Do not allow liquids to get inside the product.Ingress of liquids into the product may lead to failure,
electric shock, or fire.
• When the platen is stained with ink, wipe it off with a paper towel containing a small amount of
cleaning solution for maintenance.
• Do not allow liquids to get inside the product.Ingress of liquids into the product may lead to failure,
electric shock, or fire.
To Next Page
Loading...
