MIMAKI TS34-1800A - Page 176

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.8 P.1
1
2
3
4
5
6
7
8
6.2.8 Cap Base
 Work procedures
1. Turn off the main power supply of the machine.
2. Manually move the head unit over the platen.
3. Remove the cap head assy.
• "6.2.5 Cap Head Assy"
4. Remove the screw, and remove the cap base 1H.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Cap base 1H
Cap Head Assy
Cap Base 1H
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Cap Base
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.