© 2011 MIMAKI ENGINEERING CO.,LTD. 6.4.7 P.1
1
2
3
4
5
6
7
8
6.4.7 Paper Sensor
Work procedures
1. Remove the platen cover RR and RL.
2. Remove the paper sensors and then disconnect the connector.
3. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Paper Sensor
Model
TS34-180A
Issued
2011.10.17
Revised F/W ver
1.20
Remark
1.0
To Next Page
Loading...
