10
5
Remove the front cover.
(1) Push the both ends of the front cover.
(2) Pull the cover to the front while opening upward.
6
Dip the washing liquid into the clean-
ing swab, and wipe dirt of the wiper
nozzle.
• Wipe the places shown in the right.
• If the dirt of the wiper is heavy, replace the
nozzle (SPA-174).
When fitting the nozzle, be careful not to put
back to front.
7
After cleaning, replace the front cover,
and press the key.
• Initializing starts.
8
Press the key to finish.
To Next Page
Loading...
Need help?
General