If defective printing does not improve
11
How to recover improper discharge from the nozzle
When not using this machine for a long time or according to environmental temperature, the nozzle may be
unstable in discharging. In this case, follow the procedures below to recover nozzle.
1
Execute daily care.
• Perform daily dare to all parts noted on this manual.
2
Execute head cleaning. ( P.4)
• Repeat cleaning and test drawing, and confirm the nozzles are not clogged.
3
Execute nozzle washing. ( P.6)
• In case the nozzle does not recover after these procedures, contact with our customer
service or agency you purchased, and need to replace heads and so on.
• In case nozzle clogging is not resolved with all these procedures, contact with our customer
service or make service call to the agency you purchased.
To Next Page
Loading...
Need help?
General