16
Avoiding dripping of ink droplet at printing
Ink droplets from the mist at drawing may arise on the bottom of the carriage. As the ink droplets may drip
and stain the media or cause blur or dot missing, clean the bottom of the carriage periodically.
1
Turn the power on.
• After initializing, <LOCAL> is displayed.
2
Press the key in the local
mode.
3
Select the [MAINTENANCE] by
pressing the or key, and
press the key.
4
Select the [STATION] by pressing the
or key, and press the
key.
5
Select the [HEAD MENT] by pressing
the or key, and press the
key.
• The carriage moves to the center of the front edge, and the Y bar moves to the front.
6
Open the table front cover.
Tools
• UJ Cleaning swab (SPC-0386) • Gloves • Goggles
• F-200 / LF-200 Washing Liquid (SPC-0568)
To Next Page
Loading...
Need help?
General