8
If defective printing does not improve
In the following cases, clean the suction nozzle using the cleaning kit.
• The station interior is severely contaminated.
• Defective printing is not resolved after executing the head cleaning function ( P.4).
The examples of defective printing
These following examples indicate improper head (nozzle) firing by dust, which effect printing. Confirm the
nozzle condition periodically before or during outputting not to use in such as this condition. The nozzle
condition can be confirmed with [test print] in this machine.
Contents of the
cleaning kit
• F-200 / LF-200 Washing Liquid (SPC-0568)
• Gloves • Cleaning swab (SPC-0384) • Goggles
• When cleaning, be sure to wear the supplied goggles and gloves since you may get ink in your
eyes.
• Do not use alcohol or water.
• If contamination or bending is too severe, replacement of nozzle is required. Ask the service to
the dealer or our branch.
• When a new cleaning swab is needed, ask the dealer or our branch for new one.
To Next Page
Loading...
Need help?
General