At the end of the daily work
7
7
Dip washing liquid into the cleaning
swab, and wipe dirt of the wiper
nozzle.
• Wipe the places shown in the right.
8
Put washing liquid into the dropper,
and drop on the caps to fill them.
• Fill the washing liquid into the three caps.
9
Replace the front cover, and press the
key.
• Capping is performed and the slider returns to the
stand-by position in the back.
10
Set leaving time by pressing the
or key, and press the key.
• Usually set 10 min.
(Set value: 1 to 99 min)
• After the leaving time, cleaning is performed.
11
Press the key to finish.
• Adjust the leaving time depending on frequency of use or dirt of the nozzle.
To Next Page
Loading...
